Guitar Gear Forum

Just checked. It's a BC109.

https://chasetone.com/fuzz-fella-teal-bc109c/

my board is in my rehearsal space.... will snap a shot of it at Sound Check Thursday night... made some small changes since the BOTR

insert pic of temple audio board with hx stomp and ir-j and thats mine. its messy i just ordered all the cables and new adhesive for the mounting plates

macgaj3 wrote: ↑Wed Jan 01, 2025 4:52 pm
Board for my current 3-piece band w/ dual amps
-Peterson Tuner
-Phase 90 Script Reissue
-Analogman Mini Chorus
-EAE Limelight
-Suhr Discovery Delay
-Keeley 30ms (stereo split w/ separation delay)
-Lehle ABY (B goes to amp 2)
-Boss RE-2
-Boss PH-3
-Boss PS-3 (A goes to amp 1)

This looks super fun - you can get so much out of this setup and I bet it sounds awesome

2tallmusic wrote: ↑Wed Jan 01, 2025 5:31 pm The ES-8 board looks solid and like a lot of fun. I have recently put together a smaller board around the MS-3


IMG_20241111_210613810.jpg

MS-3 boards are good platforms to build around. I still have mine, and the board I used for my last band had the MS-3 as it's brain. I ran dirt pedals in the loops (Friedman Smallbox + various fuzzes) in front of a Pro Reverb. All modulation, delay, reverb/etc came from the MS-3. This is also where I discovered using the Blues OD for foundation dirt (now I use the regular blues driver or now Angry Driver).

Very cool platform. I also used it for a bit with a single channel amp dirty (JCM 800 2203x) in four cable method. Worked great there.

The only thing I didn't like was it took a bit to tweak it but once it's setup good to go.

Some killer boards up in hear and good to have the Sizzler back


Here's my current setup (don't worry, the HX is only being used for FX). Considering a larger board so I can squeeze my dire wolf and afterneath back on tho

Love a good board thread. Yeah, there’s some great stuff in this thread. I gotta get an updated picture of mine at some point…

Korg DT10 tuner
Dunlop Crybaby 535q wah, modded
Digitech Whammy/Wah
Akai Intelliphase phaser, modded
Proco Brat, modded
Marshall Jackhammer, modded
Korg 301DL delay
Seymour Duncan Shapeshifter tremolo, modded
Ibanez FL99 flanger, modded
Arion SCHZ chorus, EWS modded
DIgitech iStomp reverb

Currently looks like this , I may remove the R Weaver and put the drybell machine vibe back on along with the EVH 5150 OD just due to the size. Maybe use the R Weaver Violet Vibe off the board when I want a different Univibe sound.

What do you think of the Weaver?

Beef wrote: ↑Sat Jan 11, 2025 1:23 am What do you think of the Weaver?

Can’t say yet, my power supply is supposed to be true isolated and have two spots that are switchable to 12v and 18v. When I switched one to 18v , the weaver vibe was pretty noisy and not very throbby. I played around with the power supply and got the noise to go away and sounded much better. I’m going to get a good dedicated 18v power supply for it which should cure the noise issue. I also question if my power supply is giving it 18v. It’s definitely giving it more than 9v because I can see the led on the pedal glow brighter when I switch it from 9 to 18.