Replacement LP Tuners.

For all discussions about electric, acoustic and bass guitars, guitar amps, effects, modelers this is the place!!!!!
User avatar
greatmutah
Moderator
Posts: 651
Joined: Wed Jan 24, 2024 11:15 am
Location: Downriver MI

Replacement LP Tuners.

Post by greatmutah »

Hey all. I’m going through a string change on my 85 Les Paul and the tuning keys feel super loose until I get some proper string tension on them. I figure these are probably near end of life. I’m not worried about replacing them as far as guitar value because this guitar is pretty much mine and only mine unless I sell it back to my friend or his family (it was his step dads and his step dad sold it to me. Dude can’t play anymore due to rheumatoid arthritis). Which, to be honest, they’re pretty happy with me keeping up the instrument. Plus I’d keep the OG tuners in a bag in the case.

So these are stock Gibson Kluson style tuners. I know straight replacements can be fairly inexpensive. I’m also considering Kluson locking tuners. Or Gotohs. Any input on those or other locking tuners would be appreciated. I do NOT want to have to drill new holes. And tuning stability isn’t my issue. The nut on the guitar is cut well so I would also be perfectly happy with non locking tuners but having a few guitars with locking tuners, I do appreciate the convenience. And that’s all this is. Convenience.
More guitars than anyone could need
—————
Metropoulos Metroplex Mk I
Egnater Seminar Amp 50
Orange Rockerverb 50 Mk III
Peavey 5150
Fender 1976 Vibrolux Reverb
—————
Marshall 1960A G12M25 Greenbacks
Metropoulos Slant 2x12 G12H75 Creambacks.

User avatar
Guitarbilly
Site Admin
Posts: 1362
Joined: Wed Jan 24, 2024 7:08 am

Re: Replacement LP Tuners.

Post by Guitarbilly »

Grovers, Gotohs should fit in the standard Gibson hole pattern, except that you would only use one screw on. The bottom hole. But they fit right in without modifications.
I prefer Gotoh hardware above just about anything but the Grovers are fine too.
Hipshot has that mounting plate system that doesn't require any screws so no new holes.
Kluson also has some drop in locking tuners.
I'd go with locking tuners just for the ease to change strings. And the difference between a set of locking tuner vs standard tuners is 10-20 bucks so :idk:

User avatar
greatmutah
Moderator
Posts: 651
Joined: Wed Jan 24, 2024 11:15 am
Location: Downriver MI

Re: Replacement LP Tuners.

Post by greatmutah »

Yeah I’m thinking the Kluson Revolutions would be the best bet. I looked at the gotoh SD90s too. Just need a different push in bushing that they sell separate. The Klusons will be the easiest I think so that’s probably what I’ll do.
More guitars than anyone could need
—————
Metropoulos Metroplex Mk I
Egnater Seminar Amp 50
Orange Rockerverb 50 Mk III
Peavey 5150
Fender 1976 Vibrolux Reverb
—————
Marshall 1960A G12M25 Greenbacks
Metropoulos Slant 2x12 G12H75 Creambacks.

andvari7
Posts: 51
Joined: Thu Jan 25, 2024 1:11 am
Location: MSN

Re: Replacement LP Tuners.

Post by andvari7 »

I would also recommend the GraphTech Ratio tuners, which come with six sets of mounting plates, depending on the guitar. They are locking, and they take a single turn to tune a whole tone.

User avatar
greatmutah
Moderator
Posts: 651
Joined: Wed Jan 24, 2024 11:15 am
Location: Downriver MI

Re: Replacement LP Tuners.

Post by greatmutah »

I’ll look into those too.
More guitars than anyone could need
—————
Metropoulos Metroplex Mk I
Egnater Seminar Amp 50
Orange Rockerverb 50 Mk III
Peavey 5150
Fender 1976 Vibrolux Reverb
—————
Marshall 1960A G12M25 Greenbacks
Metropoulos Slant 2x12 G12H75 Creambacks.

Mike Oxhuge
Posts: 27
Joined: Thu Mar 28, 2024 11:24 pm

Re: Replacement LP Tuners.

Post by Mike Oxhuge »

Get the Klusen Supreme 18:1 replacement tuners. They are an awesome upgrade yhat makes getting perfect tuning easy. Also they hold tune so much better than OE. Direct no extra added or exposed old screw holes either.

Post Reply